Chrysler Crossfire engine oil capacity in quarts – liters. From year: 2003, 2004, 2005, 2006, 2007.
How many quarts / liters of engine oil is needed for an oil change including replacement of oil filter for a Chrysler Crossfire.
If you want to do maintenance by yourself on your Chrysler, if you want to change your engine oil and filters see and you don’t now how big it’s your engine volume or how much quarts / liters oil enter in your car engine below you can see what is your car engine oil capacity and what type of oil you must use.
Chrysler Crossfire 3.2 l, engine oil capacity in quarts / liters.
- Chrysler Crossfire 3.2 SRT-6 or 3.2 v6, it is a station, wagons, estate.
- Car fuel: gasoline.
- Chrysler Crossfire engine code: M 112.960, M 112 (EGX).
- Engine capacity: 3199 ccm (194,22 cubic inches).
- Chrysler Crossfire engine oil capacity: 8.5 quarts or 8.0 liters.
- Chrysler Crossfire manual gearbox oil capacity: 1.9 quarts or 1.8 liters.
- Chrysler Crossfire automatic gearbox oil capacity: 8.5 quarts or 8.0 liters.
- Chrysler Crossfire recommended engine oil: Castrol Magnatec, Professional Ford A1, A5, 5w-30 .
Checking oil level on a Chrysler Crossfire. To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. You can check the oil level using the procedure described in Checking Engine Oil Level in the Understanding Your Instrument Panel section, or by checking the engine oil dipstick. The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off, or before starting the engine after it has sat overnight.
Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings. Maintain the oil level between the MIN and MAX markings on the dipstick. Adding 1 quart of oil when the reading is at the MIN mark will result in a MAX reading on this engine.
When to change engine oil on a Chrysler Crossfire. The oil change interval for your Crossfire is initially set at 7,000 miles (Canada: 11,000 km). The Flexible Service System (FSS) in your vehicle evaluates engine temperature, oil level, vehicle speed, engine speed, distance driven, and the time elapsed since your last service. It determines when your vehicle needs maintenance service and alerts you in advance. The next necessary service is indicated by the FSS in your instrument cluster.
NOTE: Also see the FSS system details in the Understanding. Your Instrument Panel section of this manual.
Very light duty driving cycles (most trips more than 10 miles [16 km] at moderate speeds in moderate temperature conditions) can extend the service interval beyond 7,000 miles (Canada: 11,000 km). If ANY of the following apply to your driving, the oil change interval can be reduced significantly:
- Day and night temperatures are below 32°F (0°C).
- Stop-and-go driving.
- Extensive engine idling.
- Driving in dusty conditions.
- Short trips of less than 10 miles (16 km).
- More than 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C).
- Taxi, Police, or delivery service (commercial service).
Observe the oil change interval indicated by your FSS system. This system will monitor the driving conditions seen by your vehicle, and will recommend the best interval for servicing your vehicle to maintain it in top condition.
Engine Oil Selection. For best performance and maximum protection under all types of operating conditions, only use synthetic engine oils, approved to MB 229.3 or MB 229.5, such as Mobil 1 SAE 0W-40. The FSS may not alert for an oil change at the proper interval if an unapproved engine oil is used; engine damage and reduced engine life may result.
All information about engine oil capacity or gear box oil capacity is taken from Chrysler Crossfire owners manual.
Hear you can find the steps how can you reset Chrysler service light after you change the engine oil.
Hear you can find the fuel consumption in liters or gallons for a Chrysler.
Good info on the crossfire.