Ford Kuga engine oil capacity in quarts – liters

Ford Kuga engine oil capacity in quarts – liters. From year: 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How many quarts / liters of engine oil is needed for an oil change including replacement of oil filter for a Ford Kuga.

If you want to do maintenance by yourself on your Ford, if you want to change your engine oil and filters see and you don’t now how big it’s your engine volume or how much quarts / liters oil enter in your car engine below you can see what is your car engine oil capacity and what type of oil you must use.

 

Ford Kuga with engine 2.0 TDCi, engine oil capacity in quarts / liters.

  • Ford Kuga with engine 2.0 l.
  • Car fuel: diesel.
  • Ford Kuga engine code.
  • Engine capacity: 1997 ccm (121,25 cubic inches).
  • Ford Kuga engine oil capacity liters: 5.5 liters or 5.81 quarts or 1.45 gallons.
  • Ford Kuga manual gearbox oil capacity: 1.8 l or 1.9 qt or 0.47 gal.
  • Ford Kuga automatic gearbox oil capacit.
  • Ford Kuga recommended engine oil: 5w-30.
  • If you want to know exactly what engine oil is recommended for your car, please leave us a comment on this article: model and type of your car, engine capacity, diesel or gasoline, year when was made, and how much kw or hp has your car.

 

Ford Kuga with engine 2.5 Turbo, engine oil capacity in quarts / liters.

  • Ford Kuga with engine 2.5 l.
  • Car fuel: gasoline.
  • Ford Kuga engine code.
  • Engine capacity: 2521 ccm (153,06 cubic inches).
  • Ford Kuga engine oil capacity liters: 5.8 liters or 6.12 quarts or 1.53 gallons.
  • Ford Kuga manual gearbox oil capacity: 1.8 l or 1.9 qt or 0.47 gal.
  • Ford Kuga automatic gearbox oil capacit.
  • Ford Kuga recommended engine oil: 5w-30.
  • If you want to know exactly what engine oil is recommended for your car, please leave us a comment on this article: model and type of your car, engine capacity, diesel or gasoline, year when was made, and how much kw or hp has your car.

Ford Kuga engine oil volume in quarts – liters

Do not use oil additives or other engine treatments. Under certain conditions, they could damage the engine.

The oil consumption of new engines reaches its normal level after approximately 5 000 kilometres (3 000 miles).

Make sure that the level is between the MIN and the MAX marks.

Check the level before starting the engine.

Make sure that your vehicle is on level ground.

Oil expands when it is hot. The level may therefore extend a few millimetres beyond the MAX mark. Remove the dipstick and wipe it with a clean, lint free cloth. Replace the dipstick and remove it again to check the oil level. If the level is at the MIN mark, top up immediately.

Only top up when the engine is cold. If the engine is hot, wait 10 minutes for the engine to cool down.

Do not remove the filler cap when the engine is running.

 

All information about engine oil capacity or gear box oil capacity is taken from Ford Kuga owners manual.

Hear you can find the steps how can you reset Ford service light after you change the engine oil.

Hear you can find the fuel consumption in liters or gallons for a Ford.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.