Dodge Nitro engine oil capacity in quarts – liters

Dodge Nitro engine oil capacity in quarts – liters. From year: 2007, 2008, 2009, 2010, 2011, 2012.

How many quarts / liters of engine oil is needed for an oil change including replacement of oil filter for a Dodge Nitro.

If you want to do maintenance by yourself on your Dodge, if you want to change your engine oil and filters see and you don’t now how big it’s your engine volume or how much quarts / liters oil enter in your car engine below you can see what is your car engine oil capacity and what type of oil you must use.

 

Dodge Nitro with engine 2.8 CRD, engine oil capacity in quarts / liters.

  • Dodge Nitro with engine 2.8 l.
  • Car fuel: diesel.
  • Dodge Nitro engine code.
  • Engine capacity: 2777 ccm (168,60 cubic inches).
  • Dodge Nitro engine oil capacity liters: 6.6 liters.
  • Dodge Nitro manual gearbox oil capacity: 1.5 l.
  • Dodge Nitro automatic gearbox oil capacity: 4.8 l.
  • Dodge Nitro recommended engine oil: 5w-30 and 5w-40, Castrol EDGE Turbo Diesel 5w-40.

 

Dodge Nitro with engine 3.7 l, engine oil capacity in quarts / liters.

  • Dodge Nitro with engine 3.7 V6.
  • Car fuel: gasoline.
  • Dodge Nitro engine code: EKG.
  • Engine capacity: 3700 ccm (224,64 cubic inches).
  • Dodge Nitro engine oil capacity liters: 4.7 liters or 5 quarts.
  • Dodge Nitro manual gearbox oil capacity: 1.5 l.
  • Dodge Nitro automatic gearbox oil capacity: 4.8 l.
  • Dodge Nitro recommended engine oil: SAE 5W-20, API Certified or 5w-30.
  • Dodge Nitro 3.7 Liter Engine (MOPAR Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula): 13.3 liters or 14 quarts.

 

Dodge Nitro with engine 4.0 l, engine oil capacity in quarts / liters.

  • Dodge Nitro with engine 4.0 V6.
  • Car fuel: gasoline.
  • Dodge Nitro engine code.
  • Engine capacity: 3952 ccm (239,94 cubic inches).
  • Dodge Nitro engine oil capacity liters: 5.2 liters or 5.5 quarts.
  • Dodge Nitro manual gearbox oil capacity.
  • Dodge Nitro automatic gearbox oil capacity: 4.8 l.
  • Dodge Nitro recommended engine oil: SAE 10W-30, API Certified.
  • Dodge Nitro 4.0 Liter Engine (MOPAR Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula): 13.3 liters or 14 quarts.

Includes heater and coolant recovery bottle filled to MAX level.

 

Checking oil level on a Dodge Nitro.

To assure proper lubrication of your vehicle’s engine, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed up engine is shut off. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings. Always maintain the oil level within the SAFE zone on the dipstick. Adding one quart of oil when the reading is at the bottom of the SAFE zone will result in a reading at the top of the safe zone on these engines.

Overfilling or underfilling the crankcase will cause aeration or loss of oil pressure. This could damage your engine.

Change Engine Oil on a Dodge Nitro.

Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever comes first.

For best performance and maximum protection for all engines under all types of operating conditions, the manufacturer recommends engine oils that are API Certified and meet the requirements of Chrysler Material Standard MS-6395.

Engine Oil Viscosity Dodge Nitreo 3.7L Engine.

SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. Your engine oil filler cap shows the recommended engine oil viscosity for your vehicle. Lubricants which do not have both the engine oil certification mark and the correct SAE viscosity grade number should not be used.

Engine Oil Viscosity Dodge Nitro 4.0L Engine.

SAE 10W-30 engine oil is preferred. SAE 5W-30 engine oil is allowed during cold weather only to improve cold weather starting. Lubricants which do not have both the engine oil certification mark and the correct SAE viscosity grade number should not be used.

Synthetic Engine Oils. You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed. 

 Dodge Nitro engine oil volume in quarts – liters

All information about engine oil capacity or gear box oil capacity is taken from Dodge Nitro owners manual.

Hear you can find the steps how can you reset Dodge service light after you change the engine oil.

Hear you can find the fuel consumption in liters or gallons for a Dodge.

4 Responses to Dodge Nitro engine oil capacity in quarts – liters

  1. ryan says:

    I am wanting to know how many quartz of oil it will take for a 2008 dodge nitro if I don’t change the oil filter just the oil it’s self…??? Any answers would be great thank you..

  2. Sahana says:

    I took my 2011 Dodge Nitro to the dealer for an oil change. I have the 3.7l V6 engine. I’ve been driving it for 6 days now and my husband noticed a pile of oil in our driveway. He got underneath the vehicle and see oil has been thrown all over the bottom as well as in the engine bay. According to the receipt 6 quarts of 5w-20 were put in my SUV. What kind of problems am I potentially facing from having too much oil put in my vehicle?

Leave a Reply

Your email address will not be published. Required fields are marked *